About Flex Fitters
Flex Fitters are self-adhesive tabs that are an ideal alternative to the traditional adhesives used for the installation of back2back carpet tiles and planks. With a negligible amount of VOCs, leading to a better indoor air quality, and a higher recyclability of both the tabs and the carpet tiles, this flexible method offers a sustainable solution.
Advantages
- A negligible amount of VOCs.
- Glue-free (no drying time required).
- Made of recyclable PET.
- Easy to remove, replace and recycle the carpet tiles.
- Subfloor remains intact and without glue residues.
- A flexible method that’s compatible with any back2back carpet tile (except our minituft carpet tiles) and installation method.
- Offers creative possibilities (e.g. separate rug zones).
- 1 box contains 500 pieces, which allows you to install about 100 m².
How to install
How to install your carpet tiles using Flex Fitters in 9 easy steps.
Step 1
This is what you'll need.
Step 2
Switch off the underfloor heating.
Step 3
Open and remove the boxes.
Step 4
Check and level the substrate.
Step 5
Remove any dirt.
Step 6
Determine the starting point.
Step 7
Install your carpet tiles with Flex Fitters.
Don't forget: sticky side up!
Step 8
Cut the tiles (if needed) and add the Flex Fitters.
Step 9
Press the carpet in order to fix.